The automatic chainsaw sharpener – SA6
    The solution to your chainsaw sharpening problems

video

Only one minute of setting up
for an entirely automatic process

1. Only one operation for the entire sharpening process  (4 minutes)
2. Extremely accurate & automatic operation requiring no further supervision
 
3. Tension adjuster for the whole length of the chain
 
4. Sharpening range of chains, from ¼’’ up to .404 (½ & ¾ on request)
 
5. Fully automatic setting position & adjustment of the grindstone
 
6. Safe & immediate start up
 
7. The three parts sensor can detect a left or right gouge,also recognizes a missing tooth & stops the machine automatically
 
8. The sharpening of the gouges & depth restrictors can be carried out independently or simultaneously. The operator can readjust setting at any time
 

With the SA6 machine, 12 chains can be sharpened/hour with the minimum amount of operation by one person, allowing him/her to perform other duties. Presently, with equipment available to date, the same operation requires  two people.

Technical data :

Motors:                     230 V/ 50 Hz  // 110 V/60 Hz
Grindstones  :           Ø 150 x 3,2/3,8/4,5 x 12 mm
                                 Ø 125 x 7,0 x 12 mm
Air pressure  :           6 bar
Dimensions :             650 x 650 x 1900 mm
Weight  :                  190 kg